Go to Main Content

.

 

HELP | EXIT

Syllabus Information

 

Spring 2016
Oct 31,2024
Transparent Image
Information Use this page to maintain syllabus information, learning objectives, required materials, and technical requirements for the course.

Syllabus Information
WLD 143 - Wire Drive Welding 1
Associated Term: Spring 2016
Learning Objectives: Upon completion of this course, the successful student will be able to: 1- Set GMAW machine controls to effect short ars, spray arc and pulsed arc metal transfer while using solid wire of various sizes. 2- Select and properly connect to a GMAW power source appropriate shielding gases necessary to short arc and spray arc metal transfer. 3- Prepare typical industrial weld joints, make welds on these joints in the four standard positions, and perform destructive and non-destructive tests on those weldments. Prepare materials, outline testing procedures, make welds, prepare test specimens, and execute testing procedures consistent with certain pre-qualified American Welding Society code tests. 4- Identify the type, cause, and solution to weld defects typically associated with GMAW short arc, spray arc and pulsed arc metal transfer. 5- Perform minor maintenance on GMAW equipment associated with contact tip, liner and drive rolls.
Required Materials:
Technical Requirements:


Return to Previous New Search
Transparent Image
Skip to top of page
Release: 8.5.4